Originally posted by Jin: What are the commands to replace SV steel blocks with hardened steel?

Try: replaceblocks ID HullFullSmall HullArmoredSmallBlocksfor more of these names check in your Content/Extras folder in steam, Steam\steamapps\common\Empyrion - Galactic Survival\Content\Extras\Localization, and open up Localization.Here is some more for small blocks:
HullFullSmall - Steel Block S
HullThinSmall - Steel Block S
HullArmoredSmallBlocks - Hardened Steel Blocks S
HullArmoredThinSmallBlocks - Hardened Steel Blocks S (thin)
HullArmoredFullSmall - Hardened Steel Block S
HullArmoredThinSmall - Hardened Steel Block S Read more

replaceblocks 10 hullcombatfulllarge HullArmoredFullLargeBlock names for CV & BA:hullfulllarge = steel blocks L
hullarmoredfulllarge = hardened steel L
hullcombatfulllarge = combat blocks L

For reporting any bugs use here
https://empyriononline.com/threads/bug-reports-9-xx-gameplay-read-introduction-before-reporting.46805/& provide as much detail as possible about any bug found & how it is reproduced.
Thanks.

In your OP screenshot the one you have highlighted is what you are 'subscribed' too.Try going in to the F2 menu & finding the 'Zap-Runabout' & see if any of them have the little man with the small spanner icon & the Update box is selectable.The little man with the spanner is what you have published on the workshop.

Originally posted by zaphodikus: Yep.
I have probably never "updated" a BP before and Empyrion is the first game I ever used Workshop with, so I was expecting a button to manually upload a file. Or that in-game the "update" button would be enabled. But it aint.

To update the workshop blueprint you need to overwrite the original file then update it. It will be marked with a little person & the workshop symbol smaller to the top right of it. like in this screenshot
http://steamcommunity.com/sharedfiles/filedetails/?id=862868321http://steamcommunity.com/sharedfiles/filedetails/?id=862868367I just uploaded something to test I can update the original but no what I have subscribed too.The update option is in the F2 menu
http://steamcommunity.com/sharedfiles/filedetails/?id=862870430 Read more

Have you subscribed to your own BP ?As far as Im aware you cant overwrtite anything you are subscribed to.
If its your own just overwrite the original BP then update it on the workshop.

Please try this https://steamcommunity.com/app/383120/discussions/2/2806204040010322160/

Originally posted by AzzurA:

Originally posted by Pantera: Can anyone who is experiencing this please provide the save game in a bug report here please for me to look at
https://empyriononline.com/threads/bug-reports-9-xx-gameplay-read-introduction-before-reporting.46805/

Zipped Save Game file just been sent to support .

Ok thanks was this save game started in singleplayer ? I guess it is but just want to make sure. Read more

Can anyone who is experiencing this please provide the save game in a bug report here please for me to look at
https://empyriononline.com/threads/bug-reports-9-xx-gameplay-read-introduction-before-reporting.46805/

Originally posted by pibbotso: Yep tried creative... cant change the sv..
ah well not to worry.
Just wondering if I need to save the blueprint after changing
the blocks. Even after the blocks are replaced, when you
do the replaceblocks command again it changes it again.
strange. Still shows the cvs and bases as red not green
...the integrity is still red.?

Integrity on a SV CV or HV doesn't matter.
If the CV you mention in the OP is now converted & is ok then yes overwrite the blueprint or to be cautious you could create a seperate blueprint & put the name however you want to with UPDATED at the end so you know which is which.Edit: Some more playing around with commands for the SV small blocks its looking like you will have to do it manually. The square shape blocks are convertable with:replaceblocks ID hull HullsmallblocksHullsmallblocks is Steel blocks S all the slopes & other shapes are manual I'm afraid. Read more

Ok I did some testing I think the commandreplaceblocks ID -alpha4Will only work on the CV you mention in the OP.
But I can't get it to work on a old SV.
What colour is the SV ? RED or AMBER in the blueprint window ?If the SV is amber its because you have to many of a certain turret have a look here for some more info http://steamcommunity.com/app/383120/discussions/0/305509857561776232/ Read more

Originally posted by pibbotso: Wow thanks so much for the help I will get into
creative mode and see how it all turns out.
Great game just seems to get better all the time
hope the devs keep improving it.
thanks again..

No worries if you get stuck just post back.

Originally posted by pibbotso: But it does not mention the SV conversion...

The blocks have been seperated into small blocks for SV & HV & Large blocks for BA & CV.For SV try something like this:replaceblocks ID HullFull HullSmallBlocksTo convert everything on a sv the command above:replaceblocks ID -alpha4Might work.

Originally posted by pibbotso: Also does it mean I have to place the blueprint
to get the entityID

Yes. Read more

Originally posted by pibbotso: All my older metal blocks are just standard and come up
red...not green. Just wanted to convert the blueprints to
4.0 or above. Just been out of the game for at least 6 months
and things have changed so much. I thought I read somewhere
you can convert the blueprints in creative mode to update the
blueprint to current standards by using a console command to
convert the whole blueprint, not just the metal blocks.

Try this command in creative mode:replaceblocks ID -alpha4Put the ID number of the ship where it says ID.
To get the ship ID type DI in the console & get close enough to the ship until the ID shows up in the little black box that appears in the top of your screen.example:replaceblocks 12 -alpha4If that doesn't work you will need to Use something likereplaceblocks ID HullFull HullFullLarge Read more

What blocks types do you need to convert ?Also you might be thinking of this command:replaceblocks ID -alpha4Put the ID number of the ship where it says ID

https://eleon.zendesk.com/hc/en-us/articles/212553769-Replaceblocks-COMMANDAlso look in this directory SteamLibrary\steamapps\Common\Empyrion - Galactic Survival\Content\Extras& open localisation.csv in excel.

There is a issue with the latest experimental build of items vanishing which is being looked into
https://empyriononline.com/threads/alpha-experimental-9-0-hotfix-build-2079.46825/Please if you are opted into exp branch opt out back to the public branch B2077.

When was the save game started for anyone getting this ?
Does it happen in fresh new save games ?Can you try deleting the playfield folder for the orbit (note the name of the orbit) & sectors.yaml that are in the save game so new ones can be generated:
steamapps\common\Empyrion - Galactic Survival\Saves\Games\SAVE GAME NAME\Playfields
steamapps\common\Empyrion - Galactic Survival\Saves\Games\SAVE GAME NAME\SectorsPerhaps also backup the save game before doing this also.

Devs are aware of this now.
You should still be able to play fine after clicking on continue though.

Ok can you download this copy of it it should be ok now & replace the original BP of it when save in A9 -let me know when you have downloaded it so I can remove the link. Thanks.